Welcome to our Online Store
» OptiTrack Cameras & Software
» Foundation Motion Capture Packages
» Motion Capture Suits, Marker Sets & Calibration
» » Tracking Markers, Bases & Accessories
» Camera Accessories (Lenses & Cases)
» Cables & Hubs
» Tripods & Mounts
Tracking Markers, Bases & Accessories
In this accessories section you can find information about the various markers and tracking components that will work with OptiTrack cameras.
Reflective Optical Tracking Markers
Perfect for a wide range of motion capture and tracking applications, these premium reflective spheres help get the most precision out of your OptiTrack cameras.
  |
Reflective Markers : Facial $5 3/16" diameter "domed" marker with hard backing. Recommend spirit gum, rubber cement or other reusable adhesive. Includes: 10 count hemispheres. (Part #MCP1120) |
|
 |
Reflective Markers : 7/16" Hard $20 7/16" diameter hard marker with 6/32" mounting hole, premium laminated. Includes: 5 count hard spheres. (Part #MCP1055) |
|
 |
Reflective Marker : 5/8" Hard $5.5 5/8" diameter hard spherical marker with 6/32" threaded hole, premium laminated. Includes: 1 count hard sphere. (Part #MCP1046) |
|
 |
Reflective Marker : 5/8" Semi-Soft $6.5 5/8" diameter semi-soft spherical marker with 8/32" threaded hole. Includes: 1 count semi-soft sphere. (Part #MCP1050) |
|
 |
Reflective Marker : 3/4" Hard $5.5 3/4" diameter hard spherical marker with 6/32" threaded hole, premium laminated. Includes: 1 count hard sphere. (Part #MCP1041) |
|
Marker Bases
Use marker bases to mount our reflective spherical markers onto many types of surfaces. Great for full body motion capture. Stands easily snap into base of spheres. |
 |
Marker Base : Rigid Body Base $5 Black polycarbonate plastic rigid body has six 1/8" attachment points. Includes: 1 count base. (Part #MCP1025) |
|
 |
Marker Base : 1.5" Soft Base, 6/32" Stud $2.25 1.5" Velcro base with 6/32" stud, for use with 7/16" hard markers. Includes: 1 count base. (Part #MCP1015) |
|
 |
Marker Base : 1.5" Soft Base, 8/32" Stud $2.25 1.5" Velcro base with 8/32" stud, for use with 5/8" semi-soft markers. Includes: 1 count base. (Part #MCP1020) |
|
 |
Marker Bases : 1" Hard Base Short $10 1" plastic base with snap stud for 7/16" hard marker, 3/16" tall. Includes: 5 count bases. (Part #MCP1110) |
|
 |
Marker Bases : 1" Hard Base Tall $15 1" plastic base with snap stud for 7/16" hard marker, 1.25" tall. Includes: 5 count bases. (Part #MCP1105) |
|
IR LEDs
 |
LED : Ultra Wide Angle IR 850nm, 10 count $15 10 count, through hole infrared LEDs. View spec sheet (PDF). (Part #LED1010) |
|
Other Tracking Accessories
 |
Track Clip $9.95 Use a single TrackClip to get 6DOF position data with one camera using the SDK. This lightweight black, powder coated spring steel clip, has 3 built-in reflectors. 3 7/8" wide, 5" long, 1 7/8" tall. May be clipped onto standard baseball cap or visor. (Part #MSC0003) |
|
  |
dots $6 Reflective dots can be attached to many surfaces to facilitate tracking. They do tend to get used up so ordering some extra is always a good idea. Includes forty 1/3 inch (7.5 mm) diameter dots and twelve 1/2 by 1/2 inch squares. (Part #MSC1025) |
|
 |
raw material $3 This strip of raw 3M reflective material can be fashioned into a variety of custom shapes to meet your tracking needs. Made with a cloth backing, this raw material is far more durable and reusable than the usual paper backing reflective material you'll find on the market. Sold in one 1" x 12" strip. (Part #MSC1040) |
|
